ID: Because Grab Tab Caps are soft and flexible, most sizes are available in an undersized diameter that will provide a tight fit on a standard tube or bar. Length: Grab Tab Caps are available in any length, in .062" (1.57 mm) increments. Minimum length is .187" (4.75mm). Maximum length is stated in chart. Inside length tolerance is ± .062" (1.57 mm). Inside length is measured along the side wall to the radius of the closed end, not down the center. Wall thickness: Wall Thickness "C" is measured .250" (6.35 mm) from the open end, increasing slightly toward the closed end. Wall tolerance is ±.010" (0.25 mm). Materials: Numerous materials are available. Our most common material is a 75 durometer PVC with a glossy finish. See material chart for specifications. Standard Colors: Black, Red, White, Blue, Green, Orange, Yellow, Gray. Numerous other colors available. |
Ergonomically designed Grab Tabs have a user friendly bowed surface that reduces the amount of pinching pressure required for quick and easy removal and installation. Caps go on snug and stay put for a superior seal. This product line is not stocked. Any of these items may be ordered and scheduled for production. Please contact us for details.
Applications
"A" Inside Diameter (inches)
"A" Inside Diameter (mm)
"B" Inside Length (inches)
"B" Inside Length (mm)
"C" Wall Thickness (inches)
"C" Wall Thickness (mm)
0.240
6.100
2.000
50.800
0.055
1.400
0.302
7.670
2.000
50.800
0.055
1.400
0.365
9.270
2.000
50.800
0.055
1.400
0.458
11.630
2.000
50.800
0.055
1.400
0.490
12.450
2.000
50.800
0.055
1.400
0.552
14.020
2.000
50.800
0.055
1.400
0.615
15.620
2.000
50.800
0.055
1.400
0.677
17.200
2.000
50.800
0.055
1.400
0.735
18.670
2.000
50.800
0.055
1.400
The lengths shown above are maximum lengths. Please contact us for additional information.