A unique end design makes these caps perfect for applications requiring "ease of removal." The square end acts as a knob which allows the cap to be taken off very easily. The square end also prevents rolling.
Step 1 — Choose an Inside Diameter (A)
Step 2 — Choose a Length (B)
Anti-Roll Caps are available in any length, in .062" (1.57 mm) increments. Minimum length is .187" (4.75mm). Maximum length is stated in chart.
- Inside length tolerance is ± .062" (1.57 mm).
- Inside length is measured along the side wall to the radius of the closed end, not down the center.
Wall Thickness "C" is measured .250" (6.35 mm) from the open end, increasing slightly toward the closed end. Wall tolerance is ±.010" (0.25 mm).
Shop Stock Sizes Online
| Inside Diameter "A" | Maximum Inside Length "B" | Nominal Wall Thickness "C" | Square End "D" | ||||
|---|---|---|---|---|---|---|---|
| Inches | mm | Inches | mm | Inches | mm | Inches | mm |
| -- | -- | +/- .062 | +/- 1.57 | +/- .010 | +/- .25 | -- | -- |
| 0.296 | 7.52 | 1.250 | 31.75 | 0.065 | 1.65 | 0.437 | 11.10 |
| 0.406 | 10.31 | 1.875 | 47.63 | 0.065 | 1.65 | 0.562 | 14.27 |
| 0.531 | 13.49 | 2.000 | 50.80 | 0.070 | 1.78 | 0.687 | 17.45 |
| 0.687 | 17.45 | 1.500 | 38.10 | 0.070 | 1.78 | 0.875 | 22.23 |
| 0.796 | 20.22 | 2.000 | 50.80 | 0.080 | 2.03 | 0.921 | 23.39 |
| 0.921 | 23.39 | 2.000 | 50.80 | 0.080 | 2.03 | 1.062 | 26.97 |
| 1.125 | 28.58 | 2.000 | 50.80 | 0.080 | 2.03 | 1.250 | 31.75 |
| 1.313 | 33.35 | 2.000 | 50.80 | 0.070 | 1.78 | 1.406 | 35.71 |
| 1.656 | 42.06 | 2.000 | 50.80 | 0.080 | 2.03 | 1.750 | 44.45 |
Step 3 — Choose a Color
Caps are manufactured in 8 standard colors for multiple materials. Certain popular sizes are also stocked in red for quick shipment. Custom colors are also available.
Quick Ship —
Typically the Next Day
Longer Lead Times and
Higher Minimums
*Custom color-matching
fees may apply.
Standard Lead Time
(~ 3 Weeks)
Step 4 — Choose a Material
Stocked Short Caps are made from a 75 durometer PVC with a smooth surface and glossy finish. However, these caps can be made in materials with a variety of characteristics and features as shown below.
Material Characteristics
1. Hardness
2. Gloss
3. Texture
4. Special Features
High Temperature Resistant
Highly Weather Resistant
Fire Resistant (UL Qualifiable)
Anti-Static
Dilatable
