Manufacturer of Flexible Vinyl Long Caps

Made of tough, flexible vinyl, Long Caps are available in lengths up to 24″ long. Ideal for protecting long bolts or providing a clean finish to the end of a tube. Use our double dip process to achieve two-color or dual durometer parts. Can be imprinted, punched or sliced to your specifications.

Available with Round End or Flat End Tops

Step 1 — Choose an Inside Diameter (A)

Long Caps (L-Cap) should typically be sized to match the O.D. (outside diameter) of your part.

For a tighter fit, choose a smaller diameter. Smaller diameter caps can be applied more easily by using soapy water or heating the parts to make them more pliable.

Examples: If your O.D. is .625″ (15.88 mm), use a .625″ (15.88 mm) Long Cap.

Step 2 — Choose a Length (B)

All Long Caps are available in any length up to the maximum shown, within .062″ (1.57 mm) increments.

On Round End caps, the inside length tolerance of ± .062″ (1.57 mm) is measured to the center of the closed end.
On Flat End caps, the inside length tolerance of ± .062″ (1.57 mm) is measured along the side wall to the radius of the closed end, not down the center.

Wall Thickness “C” is measured .250″ (6.35 mm) from the open end, increasing slightly toward the closed end. Wall tolerance is ±.010″ (0.25 mm).

Shop Stock Sizes Online

Long Vinyl End Caps

Inside Diameter “A”		Maximum Inside Length “B”		Nominal Wall Thickness “C”				End Type
Inside Diameter “A”		Maximum Inside Length “B”		At Shorter Length		At Longer Length		End Type
Inches	mm	Inches	mm	Inches	mm	Inches	mm
—	—	+/- .062	+/- 1.57	+/- .01	+/- .25	+/- .01	+/- .25
0.165	4.19	3.500	88.90	0.055	1.40	0.055	1.40	RE
0.187	4.75	3.500	88.90	0.055	1.40	0.055	1.40	RE
0.207	5.26	3.500	88.90	0.055	1.40	0.055	1.40	FE
0.250	6.35	4.250	107.95	0.060	1.52	0.065	1.65	RE
0.281	7.14	5.000	127.00	0.060	1.52	0.060	1.52	FE
0.305	7.75	7.000	177.80	0.060	1.52	0.065	1.65	RE
0.313	7.95	6.000	152.40	0.060	1.52	0.065	1.65	FE
0.313	7.95	6.250	158.75	0.060	1.52	0.065	1.65	RE
0.375	9.53	6.000	152.40	0.065	1.65	0.075	1.91	FE
0.375	9.53	7.000	177.80	0.065	1.65	0.075	1.91	RE
0.437	11.10	4.000	101.60	0.065	1.65	0.075	1.91	FE
0.437	11.10	5.250	133.35	0.065	1.65	0.075	1.91	RE
0.500	12.70	5.250	133.35	0.065	1.65	0.075	1.91	RE
0.500	12.70	8.500	215.90	0.065	1.65	0.075	1.91	FE
0.562	14.27	5.250	133.35	0.065	1.65	0.075	1.91	RE
0.562	14.28	6.000	152.40	0.065	1.65	0.075	1.91	FE
0.600	15.24	5.000	127.00	0.065	1.65	0.075	1.91	RE
0.610	15.50	6.750	171.45	0.065	1.65	0.075	1.91	FE
0.625	15.88	6.000	152.40	0.065	1.65	0.075	1.91	FE
0.625	15.88	11.000	279.40	0.065	1.65	0.075	1.91	RE
0.687	17.45	5.250	133.35	0.065	1.65	0.075	1.91	RE
0.687	17.45	6.000	152.40	0.065	1.65	0.075	1.91	FE
0.725	18.42	24.000	609.60	0.065	1.65	0.075	1.91	FE
0.730	18.54	6.000	152.40	0.065	1.65	0.075	1.91	FE
0.750	19.05	6.000	152.40	0.065	1.65	0.075	1.91	FE
0.750	19.05	11.000	279.40	0.065	1.65	0.075	1.91	RE
0.812	20.63	6.000	152.40	0.070	1.78	0.080	2.03	FE
0.812	20.63	8.500	215.90	0.070	1.78	0.080	2.03	RE
0.830	21.08	6.000	152.40	0.070	1.78	0.080	2.03	FE
0.843	21.41	6.000	152.40	0.070	1.78	0.080	2.03	FE
0.843	21.41	10.500	266.70	0.070	1.78	0.080	2.03	RE
0.875	22.23	8.500	215.90	0.070	1.78	0.080	2.03	RE
0.875	22.23	24.000	609.60	0.070	1.78	0.080	2.03	FE
0.921	23.39	24.000	609.60	0.070	1.78	0.080	2.03	FE
0.937	23.80	11.000	279.40	0.070	1.78	0.080	2.03	RE
0.937	23.80	24.000	609.60	0.070	1.78	0.080	2.03	FE
0.950	24.13	6.000	152.40	0.070	1.78	0.080	2.03	FE
1.000	25.40	8.500	215.90	0.070	1.78	0.080	2.03	RE
1.000	25.40	24.000	609.60	0.070	1.78	0.080	2.03	FE
1.062	26.97	5.250	133.35	0.070	1.78	0.080	2.03	RE
1.062	26.98	6.000	152.40	0.070	1.78	0.080	2.03	FE
1.125	28.58	5.250	133.35	0.070	1.78	0.080	2.03	RE
1.125	28.58	24.000	609.60	0.070	1.78	0.080	2.03	FE
1.187	30.15	6.000	152.40	0.070	1.78	0.080	2.03	FE
1.220	30.99	10.000	254.00	0.070	1.78	0.080	2.03	FE
1.250	31.75	5.250	133.35	0.070	1.78	0.080	2.03	RE
1.250	31.75	6.000	152.40	0.070	1.78	0.080	2.03	FE
1.375	34.93	6.000	152.40	0.070	1.78	0.080	2.03	FE
1.500	38.10	5.250	133.35	0.070	1.78	0.080	2.03	RE
1.500	38.10	6.000	152.40	0.070	1.78	0.080	2.03	FE
1.625	41.28	5.250	133.35	0.070	1.78	0.080	2.03	RE
1.625	41.28	6.000	152.40	0.070	1.78	0.080	2.03	FE
1.687	42.84	6.000	152.40	0.070	1.78	0.080	2.03	FE
1.750	44.45	6.000	152.40	0.070	1.78	0.080	2.03	FE
2.000	50.80	6.000	152.40	0.070	1.78	0.080	2.03	FE
2.250	57.15	6.000	152.40	0.070	1.78	0.080	2.03	FE
2.500	63.50	6.000	152.40	0.070	1.78	0.080	2.03	FE
2.750	69.85	6.000	152.40	0.070	1.78	0.080	2.03	FE
3.000	76.20	6.000	152.40	0.070	1.78	0.080	2.03	FE
3.250	82.55	6.000	152.40	0.070	1.78	0.080	2.03	FE
3.500	88.90	6.000	152.40	0.070	1.78	0.080	2.03	FE

Step 3 — Choose a Color

Caps are manufactured in 8 standard colors for multiple materials. Certain popular sizes are also stocked in black and red for quick shipment. Custom colors are also available.

Standard

black

red

orange

yellow

green

blue

gray

white

Standard Lead Time
(~ 3 Weeks)

Custom

Longer Lead Times and Higher Minimums

*Custom color-matching fees may apply.

Step 4 — Choose a Material

Stocked Long Caps are made from a 75 durometer PVC with a smooth surface and glossy finish. However, these caps can be made in materials with a variety of characteristics and features as shown below.

View Our Material Chart

Material Characteristics

1. Hardness

2. Gloss

3. Texture

4. Special Features

High Temperature Resistant
Highly Weather Resistant
Fire Resistant (UL Qualifiable)
Anti-Static
Dilatable

Step 5 — Add Further Customization

At StockCap, our service extends beyond molding protective caps, plugs and covers to include a variety of finishing and packaging options. We have an entire facility set up to print, punch, package and more so that your team can focus on what you do best.

Learn More