Ergonomically designed Grab Tabs have a user friendly bowed surface that reduces the amount of pinching pressure required for quick and easy removal and installation. Caps go on snug and stay put for a superior seal.
Step 1 — Choose an Inside Diameter (A)
Because Grab Tab Caps are soft and flexible, most sizes are available in an undersized diameter that will provide a tight fit on a standard tube or bar.
Step 2 — Choose a Length (B)
Grab Tab Caps are available in any length, in .062" (1.57 mm) increments. Minimum length is .187" (4.75mm). Maximum length is stated in chart.
- Inside length tolerance is ± .062" (1.57 mm).
- Inside length is measured along the side wall to the radius of the closed end, not down the center.
Wall Thickness "C" is measured .250" (6.35 mm) from the open end, increasing slightly toward the closed end. Wall tolerance is ±.010" (0.25 mm).
Shop Stock Sizes Online![Grab Tab Caps Diagram](/cmss_files/imagelibrary/Flexible_Vinyl_Caps/Grab-Tab-Caps-Diagram.jpg)
Inside Diameter "A" | Inside Length "B" | Wall Thickness "C" | |||
---|---|---|---|---|---|
Inches | mm | Inches | mm | Inches | mm |
0.240 | 6.100 | 2.000 | 50.800 | 0.055 | 1.400 |
0.302 | 7.670 | 2.000 | 50.800 | 0.055 | 1.400 |
0.365 | 9.270 | 2.000 | 50.800 | 0.055 | 1.400 |
0.458 | 11.630 | 2.000 | 50.800 | 0.055 | 1.400 |
0.490 | 12.450 | 2.000 | 50.800 | 0.055 | 1.400 |
0.552 | 14.020 | 2.000 | 50.800 | 0.055 | 1.400 |
0.615 | 15.620 | 2.000 | 50.800 | 0.055 | 1.400 |
0.677 | 17.200 | 2.000 | 50.800 | 0.055 | 1.400 |
0.735 | 18.670 | 2.000 | 50.800 | 0.055 | 1.400 |
Step 3 — Choose a Color
Caps are manufactured in 8 standard colors for multiple materials. Custom colors are also available.
![Standard Color Options](/cmss_files/imagelibrary/Colors/Colors-Standard-8.jpg)
Standard Lead Time
(~ 3 Weeks)
![Custom Color Options](/cmss_files/imagelibrary/Colors/Colors-Custom-Tall.jpg)
Longer Lead Times and
Higher Minimums
*Custom color-matching
fees may apply.
Step 4 — Choose a Material
Stocked Short Caps are made from a 75 durometer PVC with a smooth surface and glossy finish. However, these caps can be made in materials with a variety of characteristics and features as shown below.
Material Characteristics
1. Hardness
2. Gloss
3. Texture
4. Special Features
High Temperature Resistant
Highly Weather Resistant
Fire Resistant (UL Qualifiable)
Anti-Static
Dilatable